Peugeot 308 Key Fob Replacement
Peugeot's 308 might be slightly old, but it is still eye-catching. It's not the most luxurious vehicle in its class, but it's a relaxing and civilised drive.
Here at Coded Car Keys we are often asked to replace peugeot 308 key fobs. Whether the problem is ongoing or continuous, the following tips should help.
Water Damage
If you accidentally drop your key fob in the puddle, or it is wet while kayaking, canoeing, rafting or canyoning the fob is more likely to be damaged by water. Keep your key fob in a dry, dry bag each time you are outdoors or engage in things that expose it to excessive amounts water.
peugeot 206 key 's also important to make sure that the fob is completely dried out before you open it to use it again. If you notice any odors emanating from the fob like an industrial liquid smell or the scent of windshield washer fluid, this is another indication that it's been submerged in water.
A wet circuit could cause the battery's charge to drain or even explode. If you're able to fish the 308 key fob from the body of water it was stuck in then flip the button side down and shake out as much water as possible before opening the case. Remove the battery, then wipe the circuit board down using a cotton swab that has been dipped in 90-percent alcohol.
Other reasons your Peugeot 308 remote keyless entry system may be unable to function could be due to the battery of your coin is dead, receiver module issues signal interference, a faulty electronic chip. If none of the above are the issue you can restart the system by disconnecting 12 voltage battery from the car for 15 minutes.
Dead Coin Battery
Peugeot cars come with remote start which allows drivers to start their car from the distance, allowing them to warm up or cool down the car before entering. This feature is extremely beneficial, especially during winter's cold and chilly months. The remote start system can be stopped for a variety of reasons, such as a dead coin-battery.
The coin-shaped battery inside the key fob could last between two and four months, depending on the frequency with which it is utilized, the place it was purchased, and the way it is utilized. The date for use-by will be printed on the packaging or mentioned in the user's manual.
If the key fob has stopped working after exposure to pure tapwater, you need to remove the battery and clean the electronic chip with the help of a paper towel that has been soaked with isopropyl ethanol. Then dry the chip thoroughly before replacing it. If the key fob has been exposed to salty or soapy water, it may have fried the chip. You'll need to replace it.
If you're not sure if the battery is defective, you can check its voltage using a multimeter connected to both the terminals for plus and minus. If the voltage is less than 12-13 volts, it is time to replace the battery. If you want to, you can try to reset the onboard computer by disconnecting the battery with 12 volts for a few minutes, and reconnecting it in reverse order (positive cable first, then negative). The engine should now begin.
Faulty Receiver Module
If you aren't seeing the "Key Detected" you might find that your receiver module is defective. It's the part that sends a signal to the car when the key fob is activated that also acts as an immobiliser. It stops it from starting unless the correct key is present.
This could be caused by many factors, including water damage or simply getting old. If the electronic chip in your Peugeot 308 keyfob is damaged by dirty tap water It could be because the keyfob was in contact with it. In this scenario it is necessary to take it apart and clean it thoroughly with isopropyl alcohol or an electronic cleaner. Once the battery has dried you can attempt to test it again.
If the issue persists, it is a good idea that you visit the local Peugeot expert or locksmith. They can employ a diagnostic tool in order to pinpoint the problem and then fix it.
It can be stressful to lose your Peugeot car key. A certified auto locksmith can solve the issue in minutes. They can cut a new key and then program it into your vehicle, making sure you're back out on the road in the shortest amount of time. Find locksmiths near you.
Faulty Electronic Chip
The electronic chip that is in the Peugeot 308 key fob is a critical function in the remote control system. If the chip is damaged, you could experience difficulties starting your vehicle or receive a message saying "anti-theft". In this scenario the only option is to replace the key. Auto locksmiths who are professionals are able to offer the fastest possible time.
The chip in your Peugeot 308's key fob may fail due to different reasons, such as sweat, water damage, or dirt. If your Peugeot 308 key fob is exposed to soapy water, clean it immediately. You can wipe the electronic component using the help of a towel that is soaked in isopropyl Alcohol. After that, let the battery dry completely.
Radio interference can cause the key fob to stop working. This can happen when other devices operate on the same frequency as your Peugeot keyfob. It could also be caused by bad weather or objects that are in the vicinity of the vehicle. It is recommended that you visit a Peugeot dealer if you encounter this issue.
The Peugeot 207/308 key fob is extremely delicate and requires special care. It is not recommended to drop it or throw it around. If you lose it, try to find it as quickly as possible. You can reset all the on-board computers by disconnecting the battery that is 12 volts for a short period of time. Disconnect the negative cable before the positive.